  |
 |
 |
|
|
FUN FOLDS |
 |
|
|
|
|
|
Use from 5 to 10 modules for the star. Note: The first time you make this star, you might want to use six or more squares. It will make the final assembly a bit easier. |
 |
||||
|
Module | ||||
|
 |
  |
|||
| 1 Begin colored side up. Fold the bottom to meet the top and unfold. Fold the sides together and unfold... | 2 Turn over. Fold the bottom point to meet the top and unfold. Repeat with the side points. Unfold. | 3 Fold the top down to the bottom. Do not unfold. | 4 Pinch as shown and push together. (See next step.) | ||
|
|||||
|
 |
 |
 |
||
| 5 Like this. Now press the triangle flat. | 6 Fold the top layer of the side points up to the top. Press them flat and unfold them. Then, repeat behind. | 7 Separate the layers in front and back. | 8 The module is ready. | ||
|
Assembly | ||||
 |
 |
||||
1 Tuck all the way in. |
2 Like this. |
||||
|
|||||
|
 |
||||
| 3 Open top with finger. | 4 Push top corners together, pinch then sharpen mountain folds in front and back. | ||||
|
|||||
 |
 |
||||
| 5 Add new module. Continue step #1 and step #3 with each module. | 6 Connect first module to last in same manner. 3D Star is ready. |
||||
|
|||||
| Diagrammed by Katrin and Yuri Shumakov | |||||
3D STAR by Rachel Katz
